Micro Scarab Kiln with Outer Point Rest

Micro Scarab Kiln with Outer Point Rest

0 out of 5 based on 0 Review(s)

Availability: Out of Stock

$1,975.00 / each


Sold Out

To be notified when this product is back in stock please click here.



Write Review

The Micro Scarab is perfect for flameworkers who are starting out or are just working with smaller projects. It runs on common household 120V service so you can plug it in just about anywhere. If affordability and portability are important to you, this could be your perfect Scarab model.

Chamber Capacity

Depth Opening Width Opening Length Cu. ft.
9.25 in 12 in 7.5 in 0.5

The Controller

KilnMaster Controller
  • The software for the COE Controller was developed by Flameworker Marcel Braun to fit the specific needs of the Boro Flameworker.
  • It can be easy as pressing Go to start working and Go twice to anneal your piece and call it a night.
  • The Controller is programmed to heat to 1100 F but you can set it for whatever temperature you want.
  • You can choose between the 3 preset Annealing programs or creat your own.
  • Marcel knows how important to know how long your piece is at he set point temperature. That is why he programmed a feature in the controller that tells you exactly that amount of time. If you dip below that temperature it waits until it is back to set point and restarts the clock.
  • It also includes built in striking and repair programs.
  • …watch the video

Primary Point Rest

Print
The Primary Point rest is designed to slide up and down to support your rods and tubes. If your handles are extremely long we would suggest adding the Optional Secondary Point Rest which extends further out from the kiln and is fully adjustable up and down.

When you are ready to anneal you slide all the point rest up tight against the doggie door to seal off the chamber.

The point rest is constructed of solid brick and stainless steel for maximum life. To operate it simply loosen the the knob, slide the rest to the position desired and tighten the knob. It was specifically designed to be a one hand operation so you can hold your glass with the other hand.

The “Doggie” Door

Sectional Design
The Doggie Door (sometimes referred to as bead door) is the brainchild of master flameworker Marcel Braun. It is constructed using a channeled stainless steel frame which holds a section of soft fiberboard. When you close the door it rests gently on your glass handles, sealing in the heat without scratching the glass. If they ever wear out you can replace them easily and inexpensively. The doors are counterbalanced to stay open on there own with weighted wood handles that stay cool to the touch.

Removeable Chasis


Let’s face it, these kilns are heavy!. The last thing you want to do is to start wrestling around with them to get at a component that needs to be replaced. All Scarab kilns are designed with a Removable Chasis which holds all the main electrical and electronic components. Just remove the screws that hold it in place and slide it out. You can even disconnect the power cord and ship the whole thing back to Skutt for testing if necessary.

One of the most problematic components of kilns has traditionally been the relays. Mechanical relays have a limited life which is why Skutt has upgraded all Scarab Kilns with Solid State Relays. These relays or kept cool with a fan mounted in the side of the kiln (not necessary on the Mini and Micro Scarab because the Amps are so low).

Optional Secondary Point Rest


The Optional Secondary Point Rests, another unique design of Marcel Braun, are generally ordered on just about every Scarab that goes out of here. Flameworkers love its ability to hold long handles, preventing their work from popping up off the floor. Its well thought out design allows you to move the rest to almost any position you want. It not only moves in and out but also moves up and down. The scalloped edge ensures that your rods will stay in place. Do Not Forget To Order This Upgrade.

The Warranty


  • Unlike most warranties, Skutt’s covers Parts AND Labor.
  • Never Pro-Rated.
  • Serviced by the most extensive, knowledgeable and talented distributor network in the industry.
  • Backed by a company whose mission statement is “We help you make great things”. When your kiln is down, you can’t make great things.

Model Phase Volts Amps Watts Temp F Cubic Feet Opening Depth Wire Size NEMA Receptacle Ship Weight
Download a MICRO SCARAB 3 Inch Brick 1 Phase 120 Volts Product Spec Sheet
MICRO SCARAB 1 120V 14.3A 1650W Cone , 1700 F 0.5 12.00 x 7.50 inches 9.25 inches 12 5-15 120 lbs

  • Item Number: SKUTT-3140

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Micro Scarab Kiln with Outer Point Rest” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!